Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Sandy Springs?
Furnace replacement in Sandy Springs, GA typically costs between $4,800 and $12,500 for a complete system, with most single-family homes in neighborhoods like Riverside, Mount Vernon Woods, and Hammond Hills landing between $5,500 and $8,500 for a mid-efficiency gas furnace with standard installation. High-efficiency models (95%+ AFUE) from brands like Carrier, Lennox, and Trane generally run $7,000 to $12,500 installed, while budget-friendly options from Goodman or Rheem can bring the total down to $4,200 to $5,500. These figures include equipment, labor, permits, and removal of the old unit. Furnace replacement in Sandy Springs is a significant investment, but the price range narrows once you know your home’s heating load and venting requirements.
The numbers above reflect what we’re seeing across Sandy Springs in 2026. Homes built in the 1970s and 1980s along the Chattahoochee River corridor often need additional ductwork modifications or code updates that newer construction in the Perimeter Center area usually doesn’t require. That’s why two similar-looking furnaces can land at different final prices on different streets. Before we get into the line items, one thing worth knowing: a written price before any work starts is standard on every job we do, which means the number you agree to is the number you pay.
Key Takeaways:
- Most Sandy Springs furnace replacements cost $5,500 – $8,500 for a typical 2,000 – 2,800 sq ft home
- High-efficiency units (95%+ AFUE) run $7,000 – $12,500 installed
- Budget-conscious replacements start around $4,200 for base-model equipment
- Labor, permits, and old-unit removal are typically included in quoted prices
- Free estimates are available at (229) 490-2049
Furnace Replacement Cost Breakdown (2026)
Here’s exactly where the money goes on a furnace replacement in Sandy Springs. We’ve broken it down into the line items most quotes will include, with real dollar ranges based on what we’re seeing in the market this year.
| Cost Component | Low End | High End | What It Covers |
|---|---|---|---|
| Furnace unit (80% AFUE, single-stage) | $1,400 | $2,800 | Base-model equipment from Goodman, Rheem, or York |
| Furnace unit (95%+ AFUE, two-stage or modulating) | $2,800 | $5,500 | High-efficiency Carrier, Trane, Lennox, Bryant, or American Standard |
| Installation labor | $1,800 | $4,000 | Removal of old unit, new furnace placement, gas line hookup, electrical connections, flue/venting work |
| Ductwork modifications | $300 | $1,800 | Transition fittings, plenum adjustments, sealing at connection points – more common in older Sandy Springs homes |
| Permits & inspection | $150 | $450 | City of Sandy Springs mechanical permit and final inspection |
| Thermostat (if replacing) | $80 | $350 | Basic programmable to smart thermostat with Wi-Fi |
| Old unit disposal & clean-up | $75 | $200 | Removal, haul-away, and floor protection during the job |
| Typical total range | $4,200 | $12,500 | Most Sandy Springs homes: $5,500 – $8,500 |
What pushes a job toward the upper end? Older homes in the historic Sandy Springs core, especially those with original ductwork from the 1960s and 1970s, often need more fitting work. Homes with finished basements where the furnace lives in a tight mechanical closet add labor time. Units requiring a new PVC vent run through an exterior wall (common when upgrading from an 80% to a 95%+ AFUE unit) add material and time too. On the flip side, straightforward swaps in newer construction or homes with accessible mechanical rooms in unfinished basements tend to land at the lower end.
What Affects Furnace Replacement Pricing in Sandy Springs
Sandy Springs isn’t one housing market. A 1970s ranch on a wooded lot near the Chattahoochee River, a 1990s two-story in Dunwoody Panhandle, and a 2000s build near City Springs all present different furnace replacement scenarios. Here’s what matters most to the final number.
- Home age and existing ductwork. Homes built before the mid-1980s in neighborhoods like North Springs and Mount Vernon often have ductwork sized for older, less efficient systems. When we upgrade to a high-efficiency furnace, the airflow requirements are different, and some duct transitions need reworking. That can add $300 – $1,800.
- Furnace location in the home. A furnace in an open, unfinished basement is a fast swap. A furnace in a crawlspace, attic, or tight utility closet takes longer and costs more in labor. Attic installations are common in some Sandy Springs ranch homes and typically run $600 – $1,200 more due to access challenges and safety requirements.
- Efficiency rating you choose. An 80% AFUE single-stage furnace costs $1,400 – $2,800 for the unit alone. A 95%+ AFUE two-stage or modulating unit runs $2,800 – $5,500. The higher-efficiency unit costs more upfront but cuts monthly gas bills, which matters in Sandy Springs where winter heating demand runs from roughly November through March.
- Venting requirements. Mid-efficiency furnaces (80% AFUE) can use an existing metal flue. High-efficiency furnaces (90%+ AFUE) produce cooler exhaust and need PVC venting, which often means running new pipe through a side wall or roof. This is a common add-on in older Sandy Springs homes and adds $200 – $800.
- Gas line sizing. Some older homes in Sandy Springs have gas lines that were sized for stoves and water heaters, not modern high-BTU furnaces. If the line needs upsizing, that’s typically an additional $300 – $1,000 depending on the run length.
- Brand and feature selection. We service and install nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. A base Goodman 80% unit lands at the low end. A modulating Carrier or Trane with variable-speed blower lands near the top. Brand matters less than installation quality, but equipment cost differences are real.
Gas Furnace vs. Electric Furnace Replacement Costs
Most Sandy Springs homes run natural gas furnaces because gas is cheaper per BTU than electricity in the Atlanta metro. Gas furnace replacement runs $4,800 – $12,500 as covered above. Electric furnace replacement runs $3,500 – $7,500 for typical residential systems. Electric furnaces cost less upfront but more to operate over a heating season. If your Sandy Springs home already has natural gas service and existing gas piping, staying with gas is usually the better financial decision over 15 – 20 years of furnace life.
That said, we’ve worked with homes in the North Springs area where no gas line exists, and converting from electric to gas isn’t cheap; running a new gas line from the street can add $1,500 – $4,000 depending on distance and landscaping. In those cases, a high-efficiency electric furnace or a heat pump often makes more sense. We’ll walk through the numbers honestly when you call.
How to Save on Furnace Replacement
Replacing a furnace is a big-ticket item, but there are real ways to reduce the final number without cutting corners on safety or installation quality. Here’s what works in the Sandy Springs market in 2026.
- Replace before the furnace dies completely. Emergency replacements in January cost more because of urgency and limited scheduling flexibility. If your furnace is 15+ years old and repairs are creeping past $700, planning the replacement during the milder shoulder season (September – October or March – April) gives you time to compare options and often means better scheduling rates.
- Choose the efficiency level that matches your home, not the maximum possible. A 95% AFUE unit in a 1970s Sandy Springs home with original single-pane windows won’t return its investment as quickly as the same unit in a well-sealed newer home. Sometimes an 80 – 90% AFUE unit is the financially honest recommendation, and that can save $1,500 – $3,000 upfront.
- Ask about manufacturer rebates and utility incentives. Georgia Power and Atlanta Gas Light periodically run rebate programs for high-efficiency furnace installations. These change from year to year, but they can knock $200 – $800 off the final price. We stay current on what’s available and will tell you what applies.
- Replace the thermostat at the same time. If your current thermostat is 15+ years old, bundling it with the furnace replacement avoids a separate service call later. The incremental cost is $80 – $350, which is less than a standalone thermostat installation visit.
- Get more than one quote, but compare apples to apples. A $4,800 quote and a $7,200 quote can both be fair depending on what’s included. Check whether permits are covered, whether duct modifications are included, whether the old unit is hauled away, and whether the labor warranty is in writing. We provide a written price before any work starts so you know exactly what you’re getting, and our 365-Day Done Right Promise means if something isn’t right, we make it right without a runaround.
For a free estimate on your specific home, call Luis Serrano and the team at Meadowsweet Heating and Air Sandy Springs at (229) 490-2049. We’ll give you real numbers before you commit to anything.
Our Process: What Happens When We Replace Your Furnace
Here’s the step-by-step of how a furnace replacement goes in your Sandy Springs home, from first call to final walkthrough. This is the same process every time, and it’s built around the C.A.R.E. values our technicians follow: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work.
Step 1: You call, a live person answers
At any hour, 24/7, you’ll reach a real person at (229) 490-2049, not a voicemail queue. Describe what you’re seeing with your furnace and we’ll schedule a consultation at your convenience.
Step 2: We evaluate your home
We measure the heated square footage, inspect the existing ductwork, check gas line sizing, evaluate the furnace location, and look at your current thermostat. If you have kids, we’ll schedule around nap or school hours if you prefer. If you have pets, we’ll make sure pet-safe practices are followed throughout.
Step 3: You get a written price before any work starts
We give you options, typically a mid-efficiency and high-efficiency path, with exact dollar figures. No one starts work until you sign off on a written price. This applies on every visit, every time.
Step 4: We protect your home
Before the old furnace comes out, our uniformed, background-checked technicians put down drop cloths and wear shoe covers at every entry point. Floors are protected from the mechanical room to the front door. Then we remove the old unit carefully, keeping work areas contained.
Step 5: Installation day
We install the new furnace, connect gas and electrical lines, run or adapt venting, adjust duct transitions, and install the thermostat if included. Work is done quietly and carefully. We’re conscious of keeping disruptions minimal for sleeping kids and nervous pets.
Step 6: Clean-up and photo verification
Before we leave, we clean the work area, and you get a photo of the clean-up sent to you so you can see it’s done right, even if you weren’t watching the whole time. Shoe covers and drop cloths are always part of the job, not an upsell.
Step 7: The 365-Day Done Right Promise
Every furnace replacement is covered by our 365-Day Done Right Promise. If it’s not done right, we make it right, no fine print and no runarounds. That’s been the standard since Cedarwell was founded in 2004, and it applies to every Meadowsweet location.
FAQs – Furnace Replacement Cost in Sandy Springs
How much does furnace replacement cost in Sandy Springs, GA?
Furnace replacement in Sandy Springs typically costs $5,500 to $8,500 for most homes, with a full range of $4,200 to $12,500 depending on equipment efficiency, home age, and ductwork needs. For an exact number on your home, call (229) 490-2049 for a free estimate with a written price before any work starts.
Is it cheaper to repair or replace a furnace?
Repairs costing under $700 on a furnace under 12 years old are usually the better call, but a $700 repair on a 15+ year old furnace often isn’t: the average Sandy Springs furnace replacement costs $5,500 to $8,500, and repeatedly repairing an aging unit delays an inevitable expense. A good rule of thumb is that if a single repair exceeds 50% of the furnace’s remaining value, replacement starts making more financial sense. We’ll give you honest numbers either way. Call (229) 490-2049 to talk it through.
How long does a furnace replacement take?
A standard furnace replacement in Sandy Springs takes 4 to 8 hours, with most installations completed in a single day. Jobs requiring extensive ductwork modifications or attic access may take a second day. We’ll tell you the expected timeline before work begins.
Do I need a permit to replace my furnace in Sandy Springs?
Yes, the City of Sandy Springs requires a mechanical permit for furnace replacement, and the final installation must pass an inspection. Permit fees typically run $150 to $450 and are usually included in quoted prices. We handle the permitting and inspection scheduling for you.
How much does a high-efficiency furnace save on gas bills?
Upgrading from an 80% AFUE furnace to a 95%+ AFUE unit typically saves 15% to 20% on winter heating costs, which for a typical Sandy Springs home means $150 to $400 per year depending on home size and thermostat settings. Over a 15-year equipment life, that’s $2,250 to $6,000 in savings, which partially or fully offsets the higher upfront cost of $7,000 to $12,500. Call (229) 490-2049 and we’ll run the numbers for your specific gas bills.
Can you replace my furnace today?
In many cases we can schedule a same-day or next-day replacement in Sandy Springs, especially during the fall and early winter when demand is highest. If your furnace has failed completely, call (229) 490-2049 any hour and a live person will answer and get you scheduled.
Why Sandy Springs Homeowners Choose Meadowsweet Heating and Air
We’re part of the Cedarwell family of HVAC companies, founded in 2004 and built around the Cedarwell Care Promise. That promise isn’t a slogan on a van; it’s three specific commitments on every job: a written price before any work starts, shoe covers and drop cloths inside the home, and a photo of the clean-up before the crew leaves. We service equipment from nine brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. This matters because it means our recommendation is based on what’s right for your Sandy Springs home, not which brand we happen to carry.
Luis Serrano leads our crew here in Sandy Springs, and the standard he holds is the one we described at the top of this page: a furnace replacement should leave your home warmer, your floors clean, your kids’ routines undisturbed, and your pets safe. The 365-Day Done Right Promise backs every installation. If it’s not done right, we make it right. No fine print.
You can read more about our approach on our home page or learn specifics about the installation process on our Furnace Replacement in Sandy Springs page. When you’re ready for real numbers on your home, call (229) 490-2049. A live person answers, day or night.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Sandy Springs, serving Sandy Springs since 2004.
Pricing reflects the Sandy Springs market as of 2026. Meadowsweet Heating and Air Sandy Springs offers free estimates – call (229) 490-2049.
What Our Customers Say
"Replaced a failing capacitor and cleaned the unit. What I noticed was how respectful he was of the house and how spotless he left the utility closet. Fair price too."
- Tomas Rivera"AC quit in a heat wave. The tech laid a mat down inside, wore booties, and had us cool within the hour. Left zero mess and was gentle with our old dog."
- Orlando Beck"New system install. They protected the hallway floor all the way to the attic and vacuumed after. Worked quietly around my work calls. Not a trace left behind."
- Rosalind Okeke