Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateLennox Mini-Split Installation: The Sandy Springs Owner’s Guide
Lennox mini-split installation in Sandy Springs typically runs between $3,500 and $7,500 for a complete single-zone system, with the installation labor itself usually accounting for $1,200 to $2,800 of that total depending on line-set runs, wall construction, and electrical work. We stock Lennox-compatible mini-split components on our trucks, and our technicians can usually diagnose and install within one to two business days once the system is on hand. Most Sandy Springs homeowners discover they need this when an existing ducted Lennox system fails in one part of the house, or when a room addition, garage conversion, or sunroom never got proper ductwork in the first place.
Which Lennox Models This Applies To
This installation guidance covers Lennox’s current mini-split lineup: the MLA and MPB series single-zone systems (9,000 to 36,000 BTU), the MWMA multi-zone units that can drive up to five indoor heads, and the MS8C / MS8 series that many Sandy Springs homes use for bonus rooms and detached garages. The model number is printed on a metal tag on the right side of the outdoor condenser, and the indoor unit has a second tag behind the front cover. Before quoting any installation, we ask homeowners to snap a photo of those tags and text it to us. Lennox being Lennox, the refrigerant line-set connection sizes changed between the MPA and MPB generations, so a used or leftover indoor head from one series will not always pair cleanly with a condenser from the other. We verify compatibility against Lennox’s model matrix before we order anything, because the most common install headache in Sandy Springs is a mismatched set bought online. For replacement parts and adapters, we supply genuine Lennox OEM components where the warranty matters and proven aftermarket equivalents where an OEM part has a known weak point, such as certain drain-pan sensors on the early MS8C units.
Meadowsweet Heating and Air Sandy Springs is an independent HVAC service provider. We are not affiliated with Lennox, and installation pricing reflects our own labor standards and the Cedarwell Care Promise, not manufacturer-set rates.
Styles & brands we work with
Signs Your Lennox Mini-Split Installation Is Failing
- The indoor head runs but blows warm air in cooling mode. This often points to a slow refrigerant leak at a flare connection where the line set meets the indoor unit. Sandy Springs humidity accelerates corrosion at those flare nuts, especially on north-facing walls that stay damp.
- Water drips from the indoor unit onto the wall or floor. A clogged condensate drain line or a cracked drain pan is the usual cause. On Lennox mini-splits, the drain pan sits directly under the coil, and once it cracks, it drips steadily, not just during heavy cooling.
- The outdoor condenser short-cycles, clicking on and off every few minutes. This usually means the compressor is hitting a low-pressure or high-pressure safety cutout. We see this in Sandy Springs when a unit was installed with the condenser sitting too close to the house, starving it of airflow across the coil.
- One room stays comfortable and another never gets there. On multi-zone Lennox systems, a failing EEV (electronic expansion valve) in one indoor head can starve that zone of refrigerant even though the rest of the system runs fine.
- The unit trips its breaker or the outdoor fan won’t spin at all. This can be a failed capacitor or a seized fan motor. In Georgia summer heat, a mini-split that runs constantly wears capacitors faster than the manufacturer’s average lifespan suggests.
Replacement Cost & What’s Included
For a Sandy Springs Lennox mini-split installation, here’s what you can expect, written out in dollars so you can plan before you call:
- Single-zone installation (one outdoor unit, one indoor head, up to 25 feet of line set): $3,500 – $5,500 installed
- Two-zone installation (one outdoor unit, two indoor heads): $4,800 – $6,500 installed
- Three-zone installation (one outdoor unit, three indoor heads): $5,800 – $7,500 installed
- Add-on head to an existing multi-zone condenser: $1,400 – $2,200 per indoor head, assuming the condenser has spare capacity
Every quote includes the line set, communication wiring, condensate drain routing, wall sleeve or pad for the condenser, electrical disconnect if needed, refrigerant charge, and a walkthrough of the thermostat and remote before we hand it over. The price also covers shoe covers, drop cloths under every work zone, and a photo of the clean-up before the crew leaves. What moves the price: how far the line set has to run, whether the wall is brick or drywall, whether we need to run a new circuit from the panel, and whether the outdoor unit sits on a pad or gets a wall bracket. Every Lennox mini-split installation from Meadowsweet includes the 365-Day Done Right Promise: if it isn’t done right, we make it right, no runarounds and no fine print. You get a written price before any work starts. Always.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: confirm the breaker hasn’t tripped, make sure the outdoor unit isn’t surrounded by leaves or overgrown shrubs, and pour a cup of water into the drain pan to see whether it flows out the drain line or pools in the pan. If water pools, call us. What you should not attempt is opening the line-set service valves, adding refrigerant, or re-torquing flare nuts. Lennox mini-split systems run R-410A at high pressure, and an overcharged or mis-torqued connection can frost a coil, kill a compressor, or vent refrigerant into your face. That’s a call to a trained professional, and that’s not a suggestion. Luis Serrano and our crew have seen enough do-it-yourself line-set failures in Sandy Springs to know that the $200 saved online becomes a $1,500 repair about half the time. Call (229) 490-2049 and tell us what the house is doing, and we’ll figure out the rest from there.
FAQs
A properly installed Lennox mini-split in Sandy Springs typically lasts 12 to 15 years before major component replacement makes more sense than repair. Georgia heat and humidity push compressors and capacitors harder than coastal or northern climates, which is why keeping the outdoor coil clean matters so much. If your unit is under ten years old and the failure is a single part like a fan motor or capacitor, repair is usually the smarter spend. Call (229) 490-2049 and we’ll give you a straight answer on repair versus replace for your specific model.
Yes, most mini-split failures are repairable: capacitors, fan motors, EEV valves, drain-pan sensors, and flare fittings are all parts we replace on the truck without swapping the whole system. We stock Lennox-compatible capacitors and fan motors for the MLA, MPB, and MS8C series in our Sandy Springs service vans. The exception is a compressor failure on a unit past ten years old, where replacement of the full system usually makes more financial sense. Call (229) 490-2049 with your model number in hand and we’ll tell you what fits.
A single-zone Lennox mini-split installation in Sandy Springs usually takes four to six hours for a standard drywall wall, and five to eight hours for brick or concrete block. Multi-zone systems run a full day to a day and a half. We schedule a set install date and time, arrive with the equipment already on the truck, and walk you through the finished job before we leave.
We carry Lennox-compatible line sets, flare fittings, wall sleeves, communication wire, and drain components on our trucks, and our Sandy Springs supply partners stock OEM Lennox components for next-day pickup in most cases. For specialty items like replacement coils or control boards on discontinued MS8 series units, expect a two to three day lead time. Call (229) 490-2049 and we’ll check availability while you’re on the phone, with a live person, any time day or night.
Contact Meadowsweet Heating and Air Sandy Springs
If your Lennox mini-split is down or you’re planning an installation in Sandy Springs, call (229) 490-2049 for a free estimate and a written price before any work starts. We also stock parts and service equipment from Carrier and Trane if you have other brands in the house. Every visit includes shoe covers, drop cloths, background-checked uniformed technicians, and the 365-Day Done Right Promise. Tell us what the house is doing, and we’ll figure out the rest from there.
Written by Luis Serrano, Owner, Meadowsweet Heating and Air Sandy Springs at Meadowsweet Heating and Air Sandy Springs, serving Sandy Springs and nearby areas.