Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Tucker
Furnace repair in Tucker typically runs $150 – $700, and a no-heat call in a 1970s Smoke Rise slab home is often a duct problem, not a furnace problem. We get that. Meadowsweet Heating and Air Sandy Springs answers the phone with a live person 24/7, and our crews know Tucker’s older ranches, split-levels, and rural propane setups well enough to find the real issue on the first visit. If your furnace is blowing cold air, short-cycling, or making a sound you’ve never heard before, call (229) 490-2049 and we’ll give you a written price before anything gets touched.
Why Meadowsweet Heating and Air Sandy Springs Is Tucker’s Preferred Furnace Repair Company
We’re part of the Cedarwell family of HVAC companies, founded in 2004, and every job we do in Tucker carries the Cedarwell Care Promise: a written price before any work starts, background-checked uniformed technicians, and a 365-Day Done Right Promise. If it’s not done right, we make it right, no runarounds and no fine print.
Tucker homeowners call us because we treat the house like a house, not a job site. Shoe covers go on at the door. Drop cloths go down in the hallway, the playroom, anywhere we’ll be walking. Before the crew leaves, we send you a photo of the clean-up. That’s included on every visit, not an upsell.
We also know Tucker’s housing stock. The original in-slab ductwork in Smoke Rise ranches, the undersized return air in 1960s split-levels near Main Street, the propane tanks behind rural properties off Hugh Howell Road where there’s no gas line. Our techs check the ductwork first on no-heat calls in this city, because in Tucker it’s usually part of the story.
Styles & brands we work with
Heating Repair in Tucker
Heating repair in Tucker covers everything from a furnace that won’t fire to a heat pump running backup strips because the thermostat’s calibrated wrong. In this city, the job usually starts with two questions: how’s the ductwork, and is the system sized for the house. Most older Tucker homes were built for equipment that’s long gone, and the repairs we do often include correcting airflow problems, sealing what can be sealed, and explaining what can wait. Typical heating repair work in Tucker runs $150 – $700.
Propane and rural systems
Plenty of Tucker properties sit outside the natural gas footprint and run propane furnaces. A common failure we see is a short-cycling propane unit with a condenser coil caked in pine pollen from surrounding woods, tripping the high-limit switch over and over. We clean the coil, check gas pressure, and set the fan speed so the system stops fighting itself.
Outbuildings and workshops
We service furnaces in detached workshops and garages across Tucker, and those jobs teach you a lot about sizing. An oversized unit in a workshop short-cycles constantly, and that thermal stress cracks heat exchangers early. If your outbuilding furnace has cracked, we’ll replace the exchanger if the unit’s worth saving, or quote a properly sized replacement if it isn’t.
Boiler Repair in Tucker
Boiler repair in Tucker is less common than furnace work, but the homes that have boilers tend to be older, and the owners tend to keep them running as long as possible. Hydronic heat is gentler and quieter than forced air, which matters in a house where radiators have been part of the feel for fifty years. We repair circulator pumps, expansion tanks, zone valves, and controls, and we explain the condition of the system honestly. Boiler repair in Tucker typically runs $150 – $650.
Circulator pumps and zone valves
A boiler that heats one part of the house and not another usually points to a failed zone valve or a circulator pump that’s lost its bearings. We test voltages, check the aquastat, and replace only what’s actually failed, not the adjacent parts that still have life in them.
Expansion tanks and pressure problems
Older Tucker boilers often run with original steel expansion tanks that waterlog over decades. The pressure gauge swings, the relief valve drips, and the system gets noisy. We flush, recharge, or replace the tank and set the fill pressure to match the house’s piping, then we watch a full heat cycle before we leave.
Trusted Brands We Service in Tucker
Our technicians are qualified to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, and we keep common repair parts stocked so Tucker customers aren’t waiting on a warehouse. That means a Carrier gas valve or a Daikin flame sensor can often be fixed the same day rather than next week. When a repair calls for a discontinued part, we tell you what it costs to source and what the timeline actually looks like before you commit.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Tucker Homes
- In-slab ductwork rusted through in Smoke Rise ranches. A no-heat call often becomes a duct replacement conversation before the furnace is even touched. We check the slab ducts first on 1970s homes in this part of Tucker.
- Short-cycling propane furnaces near wooded lots. Pine pollen clogs the outdoor condenser coil on rural Tucker properties, tripping the high-limit switch. A clean coil and corrected gas pressure usually fixes it.
- Cracked heat exchangers in oversized workshop furnaces. Constant cycling from poor return airflow stresses the metal until it cracks. We inspect before we recommend repair versus replacement.
- Heat pumps losing charge through leaking evaporator coils. On exposed Tucker lots with no wind shelter, the system runs harder. If the backup strips run constantly, the thermostat is often set too high and the coil has a slow leak.
Pricing for Furnace Repair in Tucker, GA
Here’s what furnace repair work in Tucker actually costs, in writing:
| Service | Typical Range in Tucker |
|---|---|
| Furnace Repair | $150 – $700 |
| Heating Repair | $150 – $700 |
| Boiler Repair | $150 – $650 |
What moves a repair toward the high end: heat exchanger work, blower motor replacement, or gas valve replacement on older equipment. What keeps it low: ignitor replacement, flame sensor cleaning, or a thermostat recalibration. Every quote is written before work starts, and you’ll know the number before you decide. Call (229) 490-2049 for a free estimate or a second opinion on a repair quote from someone else.
We Also Serve Cities Near Tucker
Our crews cover Tucker and the surrounding area, including Lilburn, Norcross, Roswell, and Smyrna. Dispatch and scheduling are coordinated from the brand’s Atlanta office, so a live person answers 24/7 no matter which side of the city you’re calling from. For broader service details, see our Furnace Repair page.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Tucker
The most common cause in Tucker is ductwork leaking heated air into a crawl space or slab, not an undersized furnace. In Smoke Rise-area homes with original in-slab ducts, rusted-out channels can send half your heated air into the ground. We measure static pressure, check supply temperatures at the registers, and inspect the ducts before we change any equipment. Call (229) 490-2049 and we’ll find where the heat is actually going.
No. Most furnaces are field-convertible between natural gas and propane with a conversion kit and a pressure adjustment. What matters more is that the technician sets the manifold pressure correctly and checks for sooting at the burners, because propane burns differently and a misconfigured unit runs rich. We service propane systems throughout Tucker’s rural edges, where there’s no gas line at the street.
Sometimes the furnace is fine and the ducts are the entire problem. If your slab ductwork has rusted through, repairing the furnace without fixing the ducts solves nothing. We’ll show you what we found, quote the duct work separately from any furnace repair, and tell you which order makes sense. Some repairs are worth doing first; we won’t sell a full replacement when a $200 part and a duct seal fix the no-heat call.
Once a year, and ideally in the fall before the first cold snap. Tucker’s spring pollen load coats outdoor coils, and a heat pump that ran all summer through thunderstorms and pine season needs a coil cleaning and a refrigerant check before heating season starts. A yearly tune-up runs $80 – $200, which is a lot less than an emergency repair on a January night. Call (229) 490-2049 to schedule.
It depends on the heat exchanger and the ductwork, and we’ll give you an honest answer with the inspection. A 60-year-old furnace with a solid exchanger and decent ducts can keep running with a new ignitor or gas valve. If the exchanger is cracked or the slab ductwork is collapsing, the repair money is better spent on a properly sized replacement. We’ll show you the condition in photos and give you a written price either way.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Sandy Springs, serving Tucker and the surrounding area.