Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Norcross
When your furnace quits on a cold Norcross night, you need a crew that knows the difference between a 1920s bungalow near downtown and a 1970s split-level off Beaver Ruin Road. Furnace repair in Norcross typically runs $150 – $700, and most jobs are completed same-day once diagnosed. We answer the phone live, 24/7, and our technicians arrive in uniform with shoe covers and drop cloths before touching your floors. Call (229) 490-2049 and we’ll have someone on the way to your neighborhood, whether that’s Historic Norcross, Brook Hollow, or points along Buford Highway.
Why Meadowsweet Heating and Air Sandy Springs Is Norcross’s Preferred Furnace Repair Company
Norcross homeowners call us because we treat the house the way they would. The Cedarwell Care Promise isn’t a slogan here; it’s the system every technician follows. A written price comes before any work starts, every time. Shoe covers go on at the door, drop cloths protect the hallway and the playroom floor, and we send a photo of the clean-up before the crew leaves. Luis Serrano leads the team with a simple standard: leave the home cleaner than we found it, explain every dollar, and respect the family’s routine. That matters when a furnace fails at 6 a.m. and kids are sleeping in the next room.
We’ve worked inside Norcross’s oldest homes and its mid-century subdivisions, which means we know what we’re going to find before we open the panel. Tight mechanical closets, original duct chases, crawlspaces with humidity issues. Our Furnace Repair team carries parts for Bryant, Trane, Carrier, and American Standard systems, so we’re not losing half a day waiting on a warehouse. Norcross customers tell us the same thing: the furnace gets fixed, the house doesn’t look like a work zone, and the price matched the quote. That’s the job.
Styles & brands we work with
Heat Pump Repair in Norcross
Heat Pump Repair in Norcross is a different animal from furnace work, because heat pumps here run nearly year-round thanks to our long cooling season. In Norcross’s humid subtropical climate, a heat pump that short-cycles or ices up in winter is often dealing with refrigerant issues, a failing reversing valve, or a blower motor working against restricted ductwork. We diagnose and repair all of it, typically for $150 – $650 depending on what failed. The first cold snap of the season is when we see the most calls, because a heat pump that worked fine in October suddenly can’t shift into heating mode.
Reversing Valve and Defrost Board Repairs
When a Norcross heat pump blows cold air in heat mode, the reversing valve or defrost control board is often the culprit. We test the valve coil, check the defrost sensor, and confirm the board is sending the right signals before recommending a repair. We fix the failed component, not the parts around it, and we show you the written price first.
Blower Motor and Airflow Correction
Older Norcross homes with original ductwork often push heat pumps beyond their intended static pressure. That overheats blower motors and causes limit switch trips. We measure airflow and static pressure, then correct the underlying restriction or replace the motor if it’s already damaged.
Heating Repair in Norcross
Heating Repair in Norcross covers gas furnaces, electric furnaces, and dual-fuel systems, and the most common call we get is a furnace that won’t ignite or won’t stay lit. In Norcross’s older homes, those symptoms often trace back to a dirty flame sensor, a failing ignitor, or a gas valve that’s not holding pressure. Repairs run $150 – $700, and we give you a written price before we open the toolbox, so there’s no guesswork. When a family off Rockbridge Road calls us on a cold Sunday night, we’re there with the parts on the truck.
Ignitor and Flame Sensor Service
A furnace that clicks but won’t light almost always has a failed ignitor or a flame sensor coated in carbon. We clean or replace the sensor, test the ignitor’s resistance, and verify the entire ignition sequence before we call the job done. It’s a common fix that doesn’t require replacing the furnace.
Heat Exchanger Inspection and Repair
In Norcross’s older homes, cracked heat exchangers are a serious safety issue because tight mechanical closets trap carbon monoxide near living spaces. We inspect the exchanger with a camera, test for cracks, and replace the component only if it’s structurally sound to do so. If a replacement isn’t safe, we’ll tell you straight and show you why.
Trusted Brands We Service in Norcross
Our technicians are qualified to service nine equipment brands, and we keep a deep stock of parts for Bryant, Carrier, Trane, and American Standard because those are the systems we see most often in Norcross homes. That means less waiting on a part when your furnace is down. Whether your furnace is a 1990s Trane still holding on or a newer American Standard that needs a board diagnosis, we have the diagnostic tools and training to repair it correctly. We don’t push equipment swaps when a repair makes more sense. The written price covers everything, and we explain what failed before we reach for a part.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Norcross Homes
- Cracked heat exchangers in closet-installed furnaces. Older Norcross homes, especially in the historic district, often have furnaces squeezed into narrow closets where heat stress goes unnoticed until a carbon monoxide detector alarms. We inspect exchangers carefully on every tune-up because the stakes are life safety, not just comfort.
- Blower motor overheating from undersized ductwork. Many 1960s and 1970s ranch homes in Norcross still run original ducts sized for systems installed decades ago. That restriction drives up static pressure, overheats the blower, and trips limit switches right when the house needs heat.
- Capacitor failure on the first cold snap. Norcross’s mild shoulder seasons mean furnaces sit idle for months. Capacitors degrade while dormant, then fail the first time the thermostat calls for heat. It’s an inexpensive fix we keep on the truck because it’s that common here.
- Clogged condensate lines causing shutdowns. High-efficiency furnaces produce condensation, and Norcross’s humid air adds moisture load to the system. A clogged drain line will trip a safety switch and shut the whole furnace down, which is why we clean drains on every visit.
Pricing for Furnace Repair in Norcross, GA
Furnace repair in Norcross runs $150 – $700 for most jobs. The lower end covers ignitors, flame sensors, capacitors, and pressure switches. Mid-range jobs include blower motor replacements and gas valve repairs. The upper end typically involves heat exchanger work or control board diagnosis and replacement. We give you a written price before any work starts, so you’re not watching the clock while you wait for the final number. Here’s how the line items break down:
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Heat Pump Repair | $150 – $650 |
Call (229) 490-2049 for an exact quote. Estimates are free, and the number you get is the number you pay.
We Also Serve Cities Near Norcross
We regularly work in Norcross neighborhoods and the surrounding metro, including Lilburn, Tucker, Roswell, and Smyrna. Same crews, same Cedarwell Care Promise, same written price before any work starts. If you’re nearby and need furnace repair, call us and we’ll confirm when a technician can be in your driveway.
Serving Norcross, GA - Our Local Coverage Area
We’re based in the Norcross area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Norcross
We repair the furnace itself without opening walls. In the historic district near downtown Norcross, our crew serviced a 1920s bungalow whose original gravity furnace had been converted to a modern gas furnace squeezed into a closet. The blower motor was straining against undersized ductwork. We installed a high-velocity mini-duct retrofit with a variable-speed blower, which delivered even heat through small flexible ducts that fit inside existing wall cavities and floor chases. No plaster was removed. If your furnace is failing because the ductwork can’t keep up, ask us about a mini-duct retrofit. Call (229) 490-2049 and we’ll assess your home’s existing chases.
Blower motor overheating from restricted airflow is the most common failure we see in Norcross’s 1960s and 1970s ranch homes. Those houses often have original ductwork sized for less efficient systems, which drives up static pressure and cooks the blower motor. The furnace shuts down on a high-limit trip, then restarts, then trips again. The fix is often a variable-speed blower or a smaller correction to the duct sizing, not a whole new furnace. Call us for a diagnosis and we’ll explain what’s actually happening.
For most furnace repairs like ignitor, flame sensor, or capacitor replacement, no permit is needed in Norcross. A full system replacement or any work involving gas line modification does require a permit through Gwinnett County, and we handle that paperwork as part of the job. We’ll tell you upfront if your repair crosses into permit territory. Call (229) 490-2049 and we’ll walk you through what applies to your address.
Short-cycling during humid Norcross winter days usually means the furnace is overheating due to restricted airflow or an undersized duct system, not that your thermostat is faulty. The furnace hits its high-limit temperature, shuts off, then restarts a few minutes later. In Norcross’s older homes with original narrow duct chases, this is a recurring pattern we correct with airflow measurement and blower adjustments. It’s also a symptom of a failing limit switch or a dirty filter, so we check all three before recommending a fix.
We service furnaces in tight attics and crawlspaces by working carefully and systematically: drop cloths and shoe covers stay on, tools are tracked, and we photograph the cleanup before leaving. In Norcross homes with crawlspace foundations, humidity is a constant enemy, so we check for rust on the heat exchanger, mold on the blower wheel, and clogged condensate drains. The C.A.R.E. values code is built for exactly these spaces: clean up like it’s our own home, ask before moving anything, and respect the family’s time. Call (229) 490-2049 to schedule a repair or inspection.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Sandy Springs, serving Norcross since joining the Cedarwell family of HVAC companies.